# EMC3080 FogCloud Module
#1. Introduction
- EMC3080 FogCloud Module is an integrated hardware and firmware product launched by MXCHIP, used to quickly connect to the FogCloud platform.
- It achieves high-speed connectivity through "no development" and "zero code" methods, greatly shortening the development and launch cycles of customers' complete products.
- In addition, using the FogCloud platform independently developed by MXCHIP, the OTA of modules and the timeliness of upgrade iterations have been ensured to the greatest extent possible. The module image is as follows:
- The module for this product is EMC3080-P, which is a Wi Fi+BLE Combo module with a working voltage of 3.3V and a working temperature of -20~85 ° C. The Cortex M33 core has a main frequency of up to 100MHz, 256K bytes of SRAM, 384K bytes of ROM, 2M bytes of XIP Flash, 2.4 GHz Wi Fi that meets IEEE 802.11 b/g/n standards, low-power Bluetooth that meets the BLE4.2 specification, and supports Bluetooth networking.
#2. Hardware Documents
- Datasheet:
- Certificaiton：
- Reference Design:
- Reference design schematic and module packaging files:
📎EMC3080_REF_and_PCB_Package-PADS.zip
#3. Software Documents
- YAT protocol and command, please refer to: YAT Protocol and Command
- YAT cloud connection protocol, please refer to: FogCloud YAT Product Access Protocol
- YAT module firmware burning method, please refer to: EMC3080 Firmware Download
#4. Development and Debugging
- To obtain the module development board, please contact MXCHIP Sales (opens new window) or visit the Development Board Product Page on MXCHIP official website for selection.
- For YAT debugging tools, please refer to the YAT Debugging Assistant and Usage Documentation.
- Please refer to the EMC3080 Series Module RF Testing Method for module RF performance testing methods.
#5. QC Test Method
- For module burning production testing, reference: Module Production Testing Method.
- For the production testing of complete machine burning, refer to: Complete Machine Production Testing Method.
- For the production and testing needs of large-scale module and complete machine burning, it is recommended to use the MXCHIP BAT System.
#6. Development Guideline
- To access the FogCloud cloud platform using YAT modules, please refer to: FogCloud YAT Product Access Process。
END.